Show simple item record

dc.contributor.authorJones, Jason B.en
dc.contributor.authorTallis, Andreaen
dc.contributor.authorTillotta, V.en
dc.contributor.authorMoroz, Adamen
dc.contributor.authorWimpenny, D. I. (David I.)en
dc.date.accessioned2012-07-10T15:09:24Z
dc.date.available2012-07-10T15:09:24Z
dc.date.issued2007
dc.identifier.citationJones, J.B. et al. (2007) Rheological Properties of HA Slurry for the Production of Bone Scaffolds by Layer Manufacturing. 8th National Conference on Rapid Design, Prototyping and Manufacture, Ghent, Belgium,en
dc.identifier.urihttp://hdl.handle.net/2086/6328
dc.description.abstractIn recent years, innovative methods have been developed for the repair and regeneration of damaged and diseased bone tissue. Ceramic bio-scaffolds provide advantageous features as compared to other materials. The potential exists to use a slurry* composed of silica and hydroxyapatite (HA) which can be extruded through a controlled rate/pressure nozzle for rapid and accurate manufacturing of the green body of the scaffold. In order to fine-tune the slurry to be used in this process analysis of the HA particles and rheological characterisation and testing of a range of slurry formulations was undertaken. The measurement of the viscosity, its time dependent behaviour and the strength of the internal structure of the slurry are vital tools to characterize the suitability of ceramic slurry for the extrusion process. A plotting trial was also conducted with the objective of examining the behaviour of the different formulations under a range of pressure/extrusion rate parameters. The composition of the slurry formulations was in the range of 30 to 40 weight % of HA and was eventually fine-tuned to 35% by weight HA, which gave the best performance from the point of view of viscosity, oscillation, and extrusion properties. It was observed that the slurries behaved in non-Newtonian, shear-dependent complex modes.en
dc.language.isoenen
dc.subjectDirect writingen
dc.subjectAdditive Manufacturingen
dc.subject3D Printingen
dc.subjectrheologyen
dc.subjectmedical implantsen
dc.subjectMass customizationen
dc.titleRheological Properties of HA Slurry for the Production of Bone Scaffolds by Layer Manufacturingen
dc.typeConferenceen
dc.researchgroupAdditive Manufacturing Technology Groupen
dc.peerreviewedYesen


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record