Show simple item record

dc.contributor.authorPanich, N.
dc.contributor.authorWangyao, P.
dc.contributor.authorVisuttipitukul, P.
dc.contributor.authorSricharoenchai, P.
dc.contributor.authorSun, Yong
dc.date.accessioned2010-05-18T14:33:08Z
dc.date.available2010-05-18T14:33:08Z
dc.date.issued2008-08-20
dc.identifier.citationPanich, N. et al. (2008) Improvement in adhesion of sputtered TiB2 coating onto high speed steel by a chromium interlayer. Materials Transactions, 49 (10) pp. 2331-2334en
dc.identifier.issn1347-5320
dc.identifier.issn1345-9678
dc.identifier.urihttp://hdl.handle.net/2086/3832
dc.description.abstractThis work addresses at the development of the use of interlayer of different materials for TiB2 coatings with increased adhesion to the substrate and retained high hardness. Ti and Cr were deposited on stationary high speed steel and silicon wafer substrates by magnetron sputtering as an interlayer material. The resultant coatings were evaluated with respect to fundamental properties such as structure, coating roughness, hardness, modulus and adhesion. It was found that the adhesion of resultant TiB2 coatings was increased tremendously with Cr interlayer, whilst the hardness was slightly increased.en
dc.language.isoenen
dc.publisherThe Japan Institute of Metalsen
dc.subjecttitanium diboride coatingen
dc.subjectmagnetron sputteringen
dc.subjectadhesionen
dc.titleImprovement in adhesion of sputtered TiB2 coating onto high speed steel by a chromium interlayer.en
dc.typeArticleen
dc.identifier.doihttp://dx.doi.org/10.2320/matertrans.MRA2008107
dc.researchgroupEmerging Technologies Research Centre
dc.peerreviewedYesen
dc.researchinstituteInstitute of Engineering Sciences (IES)en


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record