Show simple item record

dc.contributor.authorWimpenny, D. I. (David I.)en
dc.contributor.authorBryden, B. (Brian G.)en
dc.contributor.authorPashby, I. R. (Ian R.)en
dc.date.accessioned2008-11-24T14:07:58Z
dc.date.available2008-11-24T14:07:58Z
dc.date.issued2003-01-01en
dc.identifier.citationWimpenny, D.I., Bryden, B. and Pashby, I.R. (2003) Rapid Laminated Tooling. Journal of Materials Processing Technology, 138(1-3), pp. 214-218.
dc.identifier.issn0924-0136en
dc.identifier.urihttp://hdl.handle.net/2086/307
dc.descriptionAn output from an EPSRC funded project (GR/K67151/01, £231,279) involving collaboration of 3 universities and 6 industrial partners, including Rolls Royce, BAE Systems, Airbus and Short Brothers. A novel tooling method based on laser cut metal sheets, brazed to form a laminated structure, was developed and tested. The project was awarded Alpha 4 for Science and Technology merit and excellent for management and use of resources in the final report assessment. Research to further develop and extend the process for the manufacture of high pressure die casting tools was subsequently secured from EPSRC – IMI RADICAL (GR/M75068).en
dc.language.isoenen
dc.publisherElsevieren
dc.subjectRAE 2008
dc.subjectUoA 28 Mechanical, Aeronautical and Manufacturing Engineering
dc.titleRapid laminated tooling.en
dc.typeArticleen
dc.identifier.doihttp://dx.doi.org/10.1016/S0924-0136(03)00074-8en
dc.researchgroupManufacturing Research


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record