Show simple item record

dc.contributor.authorHanby, V. I. (Victor Ian), 1942-
dc.contributor.authorRoberts, Eric C.
dc.contributor.authorFletcher, David W.
dc.contributor.authorJones, D. Neil T.
dc.date.accessioned2008-01-09T19:46:31Z
dc.date.available2008-01-09T19:46:31Z
dc.date.issued2002
dc.identifier.citationHanby, Victor Ian, et al. (2002) Simulation of the operation of a climatic wind tunnel. Proceedings of the Institution of Mechanical Engineers, 216 (D), pp. 23-33en
dc.identifier.issn0954-4070
dc.identifier.urihttp://hdl.handle.net/2086/81
dc.description.abstractThe climatic wind tunnel (CWT) is a facility which is widely used in vehicle and component manufacturing to reduce product development times. In view of the wide range of temperatures, humidities and wind speeds required for testing, the energy cost can be a significant component of the overall cost of testing. The paper describes a project which was primarily concerned with the development of a detailed, component-based model of a climatic wind tunnel, its associated plant and the test vehicle. The model was tested against measured plant performance and shown to give a satisfactory representation of plant performance. The potential uses of the model are illustrated by the exploration of alternative control strategies and plant configurations.en
dc.description.sponsorshipMotor Industry Research Associationen
dc.language.isoenen
dc.publisherProfessional Engineering Publishingen
dc.relation.ispartofseriesIR/2008/4en
dc.subjectRAE 2008
dc.subjectUoA 30 Architecture and the Built Environment
dc.subjectenergyen
dc.subjectsimulationen
dc.subjectclimatic wind tunnelen
dc.titleSimulation of the operation of a climatic wind tunnelen
dc.typeArticleen
dc.identifier.doihttp://dx.doi.org/10.1243/0954407021528878
dc.researchgroupInstitute of Energy and Sustainable Development


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record