Now showing items 1-10 of 27
Origin of the OFF state variability in ReRAM cells
(IOP Science, 2014-03-20)
This work exploits the switching dynamics of nanoscale resistive random access memory (ReRAM) cells with particular emphasis on the origin of the observed variability when cells are consecutively cycled/programmed at ...
Resistive switching characteristics of indium-tin-oxide thin film devices
We demonstrate that indium tin oxide (ITO), when used as an active core material in metal–insulator–metal type devices, facilitates resistive switching. We fabricated devices both on silicon as well as quartz wafers, to ...
Stochastic switching of TiO2 based memristive devices with identical initial memory states
In this work, we show that identical TiO2-based memristive devices that possess the same initial resistive states are only phenomenologically similar as their internal structures may vary significantly, which could render ...
Fabrication of photovoltaic devices using novel organic polymer/nanostructure blends.
(Cambridge University Press, 2011)
Memory effect of a different materials as charge storage elements for memory applications
(Trans Tech Publications, 2013)
Inkjet printing of polyvinyl alcohol multilayers for additive manufacturing applications
Here we demonstrate that inkjet printing technology is capable of producing polyvinyl alcohol (PVOH) multilayer structures. PVOH water-based inks were formulated with the addition of additives such as humectant and pigments. ...
Origin of Stochastic Resistive Switching in Devices with Phenomenologically
Nanoscale resistive switching devices are nowadays widely employed in applications of storage, logic and computing. The switching mechanism of metal oxide based devices is normally assumed to be the filamentary formation ...
Development of a direct feed fused deposition modelling technology for multi-material manufacturing
(AIP publishing (American Institute of Physics), 2016)
Fused Deposition Modelling (FDM) is one of the most widely used Additive Manufacturing (AM) technologies to fabricate a three-dimensional (3D) object via melt processing of a thermoplastic filament. However, it is limited ...
Ferro-electric nanoparticles in polyvinyl acetate (PVAc) matrix – A method to enhance the dielectric constrant of polymers.
(American Scientific Publishers, 2010)
In order to take advantage of the possibilities for constructing electronic devices, offered by organic materials, it is essential to be able to control their electrical characteristics. By incorporating tetragonal barium ...
Electrical Conductivity Bistability in Nano-Composite
(The society for solid-state and electrochemical science and technology, 2013-05-12)
Nano-composite polymer memory devices are fabricated by depositing a blend (an admixture of organic polymer, small organic molecules and nanoparticles) between two metal electrodes. These devices show two electrical ...