Improvement in adhesion of sputtered TiB2 coating onto high speed steel by a chromium interlayer.
This work addresses at the development of the use of interlayer of different materials for TiB2 coatings with increased adhesion to the substrate and retained high hardness. Ti and Cr were deposited on stationary high speed steel and silicon wafer substrates by magnetron sputtering as an interlayer material. The resultant coatings were evaluated with respect to fundamental properties such as structure, coating roughness, hardness, modulus and adhesion. It was found that the adhesion of resultant TiB2 coatings was increased tremendously with Cr interlayer, whilst the hardness was slightly increased.
Citation : Panich, N. et al. (2008) Improvement in adhesion of sputtered TiB2 coating onto high speed steel by a chromium interlayer. Materials Transactions, 49 (10) pp. 2331-2334
ISSN : 1347-5320
Research Group : Emerging Technologies Research Centre
Research Institute : Institute of Engineering Sciences (IES)
Peer Reviewed : Yes