Show simple item record

dc.contributor.authorDuffy, A. P.en
dc.contributor.authorZhang, Gangen
dc.contributor.authorKoziel, Slawomiren
dc.contributor.authorWang, Lixinen
dc.date.accessioned2016-11-21T10:32:30Z
dc.date.available2016-11-21T10:32:30Z
dc.date.issued2015-04-29
dc.identifier.citationDuffy, A.P., Zhang, G., Koziel, S. and Wang, L. (2015) Objective Selection of Minimum Acceptable Mesh Refinement for EMC Simulations. IEEE Transactions on Electromagnetic Compatibility, 57 (5), pp. 1266-1269en
dc.identifier.urihttp://hdl.handle.net/2086/12864
dc.descriptionThe file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.en
dc.description.abstractOptimization of computational electromagnetics (EM) simulation models can be costly in both time and computing resource. Mesh refinement is a key parameter in determining the number of unknowns to be processed, which, in turn, controls the time and memory required. Hence, it is important to use only a mesh that is good enough for the objectives of the simulation. This might be for direct handling of high-fidelity EM models or, even more importantly, for setting up low-fidelity models in variable-fidelity optimization. On the other hand, in the early stages of an optimization process, a relatively coarse mesh can show whether the governing parameters of the simulation are being appropriately modeled. As the simulation geometry approaches its target, then so to can the mesh definition become more refined. This paper presents an approach to identify the minimum acceptable mesh coarseness based on the projected evolution of FSV’s Global Difference Measure as a model is refined from a very crude representation. Our approach is demonstrated using two examples of antenna structures.en
dc.language.isoen_USen
dc.publisherIEEEen
dc.subjectelectromagnetic compatibilityen
dc.subjectoptimisationen
dc.subjectEMC simulationsen
dc.subjectcomputational electromagnetics simulation modelsen
dc.subjectFSVen
dc.subjectminimum acceptable mesh refinementen
dc.subjectsimulation geometry approachesen
dc.subjectvariable-fidelity optimizationen
dc.subjectBiological system modelingen
dc.subjectComputational electromagneticsen
dc.subjectComputational modelingen
dc.subjectConvergenceen
dc.subjectElectromagnetic compatibilityen
dc.subjectMathematical modelen
dc.subjectOptimizationen
dc.subjectFeature selective validation (FSV)en
dc.subjectsimulationen
dc.subjectvariable-fidelity optimizationen
dc.titleObjective selection of minimum acceptable mesh refinement for electromagnetic simulationen
dc.typeArticleen
dc.identifier.doihttp://dx.doi.org/10.1109/TEMC.2015.2417523
dc.researchgroupCentre for Electronic and Communications Engineeringen
dc.peerreviewedYesen
dc.funderN/Aen
dc.projectidN/Aen
dc.cclicenceCC-BY-NC-NDen
dc.date.acceptance2015-02-21en
dc.researchinstituteInstitute of Engineering Sciences (IES)en


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record